How to change your oil

To change your oil, drain the old oil through the drain plug under the engine, replace the oil filter, then refill with the grade and amount in your owner's manual and check the level on the dipstick. Four things to know:

Dark metal oil can with a long brass spout
An oil can is one of the tools for a DIY oil change.Photo: tlford / Pixabay
  1. 1

    The right oil

    Use the grade and capacity in your owner's manual, for example 0W-20 and 4.4 quarts.

  2. 2

    Ramps and chocks

    Drive onto ramps on level ground, set the brake and chock the rear wheels.

  3. 3

    Hot oil

    Used oil and metal parts can be very hot. Wear glasses and gloves.

  4. 4

    Recycle it

    Many service stations take used oil and filters, sometimes for a small fee.

Keep your car records in Evernote. Ask the manual, log every job, and get reminded.

Start your car log in Evernote

How to change your oil in 8 steps

  1. 1

    Get the oil, filter and tools

    Check your owner's manual for the oil grade, the capacity, the filter type and how often to change it. Put on safety glasses and gloves.

  2. 2

    Drive onto ramps and chock the wheels

    On a dry, level surface, line the ramps up with the front wheels and drive slowly onto them. Put the car in park, set the parking brake, and push a chock snugly behind each rear wheel.

  3. 3

    Drain the old oil

    Set the oil pan under the drain plug, with newspaper around it. Loosen the plug counterclockwise with a socket and ratchet and let the oil drain for several minutes.

  4. 4

    Put the drain plug back

    Put the washer back in place, then reinstall the plug clockwise and tighten it. If the washer or the threads look worn, replace the plug or washer before you refill.

  5. 5

    Replace the oil filter

    Move the pan under the filter and loosen it counterclockwise with an oil filter wrench. Spread a thin layer of new oil on the new filter's rubber gasket, then screw it on by hand, clockwise.

  6. 6

    Pour in the new oil

    Open the hood, take off the oil cap and set a funnel in the fill hole. Pour in the amount your manual specifies, slowly, then put the cap back on.

  7. 7

    Check for leaks and the level

    Back off the ramps onto level ground. Start the engine, let it idle for a minute or so and look for leaks at the plug and the filter. Shut it off, wait 5 to 10 minutes, then check the dipstick and add oil if needed.

  8. 8

    Log it and recycle the old oil

    Write down the date and the mileage, and add your oil change interval to find when the next one is due: 48,210 plus 7,500 is 55,710. Take the used oil and the old filter to a place that recycles them.

Oil change record

An example DIY oil change, step by step
StepWhat was done
1Oil and filter4.4 quarts of 0W-20 and an oil filter, from the manual
2SetupRamps under the front wheels, brake on, two chocks
3Drain10 minutes into the pan
4PlugNew washer, plug tightened
5FilterGasket oiled, tightened by hand
6Refill4.4 quarts through a funnel
7ChecksNo leaks after a minute, level in range
8Next change48,210 miles now, next at 55,710

An example. Your car's grade and capacity are in its owner's manual.

Oil change tools and supplies

What you need depends on the car. This is the list for a DIY oil change.

ItemWhat it is for
Motor oil and a new oil filterThe grade, amount and filter from your owner's manual.
Wheel ramps and chocksRaise the front of the car and keep it from rolling.
Safety glasses and glovesHot oil and metal parts.
Ratchet and socket setRemove and refit the drain plug.
Oil filter wrench and a new washerRemove the filter and seal the drain plug.
Funnel and oil panCatch the old oil and pour in the new.
Clean rags and newspaperWipe up drips and protect the ground.

Source: wikiHow, "How to Change the Oil in Your Car", reviewed by an ASE Master Heavy Truck Technician.

Free car maintenance log template

Copy it, or save it to your Evernote account and add a line after every job.

Car: [year, make, model] · Plate: [number] · Tire pressure: [psi from the door sticker]

Oil: [grade from the owner's manual] · Change every [miles] or [months]

Engine air filter: last changed [date] at [miles] · next at [miles]

Cabin air filter: last changed [date] at [miles] · next at [miles]

Battery: installed [month, year] · Wipers: replaced [month, year]

Log: [date] · [miles] · [what was done] · [shop or DIY] · [cost]

Next check: [date] · [what to check]

Trusted by Millions Worldwide

4.4

2,100+ reviews on G2

4.4

8,200+ reviews on Capterra

4.4

73,000+ reviews on App Store

248M

Registered users

Oil change questions

How often should I change my oil?

Often every 6 to 12 months, or around 5,000 to 10,000 miles. The right interval for your car is in your owner's manual.

How much oil does my car take?

It depends on the engine, so check the capacity in your owner's manual, for example 4.4 quarts. After you refill, check the dipstick and add a little more only if the level is low.

What oil should I use?

The grade your owner's manual lists, such as 0W-20. Using the recommended grade can improve gas mileage by 1% to 2%, according to FuelEconomy.gov, compared with a heavier grade.

What should I check after an oil change?

Start the engine and let it idle for a minute or so while you look for leaks at the drain plug and the filter. If you see one, shut the engine off and find the cause. Then turn it off, wait 5 to 10 minutes and check the dipstick.

What do I do with the used oil?

Recycle it. Many service stations take used motor oil and filters, sometimes for a small fee, and your local government can tell you what else they accept.

What if the drain plug washer looks worn?

Put a new washer in place before you refit the plug. Check the washer at every oil change, and replace it if it looks damaged.

How to keep track of oil changes with Evernote

Keep the owner's manual, receipts and a service log in a Car notebook. The AI Assistant finds what the manual says about oil changes and keeps the log current.

  1. 1

    Ask the manual.

    Save the owner's manual PDF in the notebook. Ask the AI Assistant "How many quarts of oil does my engine take?" It reads the PDF and tells you the answer and the page.

  2. 2

    Log every job.

    Take a photo of the receipt into a note. Ask the Assistant to add it to your service log, and it fills in the date, mileage, work and cost.

  3. 3

    Set the next check.

    Ask for a repeating task, like changing the oil every 6 months. It comes back on schedule with a reminder.

  • You can also search inside the manual for any word, like "fuse" or "tire size".
  • You can also share the notebook with whoever else drives the car.

Keep your car records in one notebook.

Keep the owner's manual, your receipts and a service log in one notebook, and let the AI Assistant remind you of the next check.

Start for free