4.4
2,100+ reviews on G2
Cleaning a shower head means soaking it in white vinegar to dissolve the calcium and limescale that clog the nozzles, then scrubbing it with warm water and rinsing. A head you cannot take off soaks in a plastic bag of vinegar tied around it. Four things matter:

A warm-water scrub removes loose buildup before the soak.
Plain vinegar for a few hours, or half vinegar and half water if your care sheet says so.
Fill a plastic bag with vinegar and secure it with tight rubber bands.
No abrasives, steel wool, bleach or ammonia on the metal finish.
Keep your chores in Evernote. Let the Assistant read the manual and set a repeating task.
Look up your shower head's care sheet for the soak time and any finish warnings.
Scrub the face of the shower head with warm water and a soft brush to loosen visible buildup.
Take off a detachable head and put it in a bowl of distilled white vinegar. For a fixed head, fill a plastic bag with vinegar, pull it up so the head sits in it and secure it with tight rubber bands.
Kohler suggests soaking in vinegar for a few hours. Check your own head's care sheet before you start.
Remove the bag or take the head out of the bowl. Scrub it again with warm water to remove the softened deposits, then run the shower for a minute to flush the nozzles.
Wipe the outside with a mild soap, rinse it and dry it with a soft cloth. Never use abrasive sponges, steel wool, ammonia, bleach or solvents on the finish.
Low pressure that started suddenly, with no buildup, can be a valve problem: call a plumber (Kohler).
One card per chore. Copy it, or save it to your Evernote account and keep it next to the manual.
Chore: Clean the shower head
How often: [every few months in hard water]
Takes: [minutes]
You need: [supplies]
Steps:
1. [first step]
2. [next step]
Model number: [from the label on the appliance]
Last done: [date] · Next due: [date]
4.4
2,100+ reviews on G2
4.4
8,200+ reviews on Capterra
4.4
73,000+ reviews on App Store
248M
Registered users
Kohler suggests a few hours in vinegar. Check your own head's care sheet.
Fill a plastic bag with vinegar, pull it up around the head so the nozzles are covered and secure it with tight rubber bands. Leave it to soak, then scrub and run the water.
Minerals such as calcium and limescale can build up inside it, according to Kohler. A vinegar soak clears it. A sudden drop with no buildup can point to the shower valve instead.
Vinegar is a gentle way to remove mineral buildup. Avoid harsh limescale removers, abrasives, ammonia, bleach and solvents, which can damage the finish.
Avoid abrasive cleaners and sponges, steel wool, ammonia, bleach, organic solvents such as alcohol, and harsh limescale removers. They can damage the finish.
Whenever the spray gets uneven or weak. In hard water areas that can be every few months.
Keep one note per chore in a Home notebook, and let tasks bring each chore back when it is due.
Attach the manual's PDF to the chore note and ask the AI Assistant how to clean the shower head. It reads the PDF and adds the steps to the note as a checklist.
Ask the AI Assistant for a task that repeats every 3 months. It comes with a reminder on the day it is due.
Open the Tasks view to see what is due in the next 7 days and later. Assign a task to anyone you share the note with.
Keep the steps with the manual, let each chore repeat on its own, and see everything that is due in one list.
Start for free