How to clean a shower head

Cleaning a shower head means soaking it in white vinegar to dissolve the calcium and limescale that clog the nozzles, then scrubbing it with warm water and rinsing. A head you cannot take off soaks in a plastic bag of vinegar tied around it. Four things matter:

Close-up of a showerhead spraying water in a bathroom
A showerhead spraying water after a vinegar soak.Photo: 955169 / Pixabay
  1. 1

    Scrub first

    A warm-water scrub removes loose buildup before the soak.

  2. 2

    Vinegar soak

    Plain vinegar for a few hours, or half vinegar and half water if your care sheet says so.

  3. 3

    A bag if it is fixed

    Fill a plastic bag with vinegar and secure it with tight rubber bands.

  4. 4

    Gentle on the finish

    No abrasives, steel wool, bleach or ammonia on the metal finish.

Keep your chores in Evernote. Let the Assistant read the manual and set a repeating task.

Plan your chores in Evernote

How to clean a shower head in 6 steps

  1. 1

    Check the care instructions

    Look up your shower head's care sheet for the soak time and any finish warnings.

  2. 2

    Scrub the nozzles with warm water

    Scrub the face of the shower head with warm water and a soft brush to loosen visible buildup.

  3. 3

    Soak it in vinegar

    Take off a detachable head and put it in a bowl of distilled white vinegar. For a fixed head, fill a plastic bag with vinegar, pull it up so the head sits in it and secure it with tight rubber bands.

  4. 4

    Wait

    Kohler suggests soaking in vinegar for a few hours. Check your own head's care sheet before you start.

  5. 5

    Scrub again and rinse

    Remove the bag or take the head out of the bowl. Scrub it again with warm water to remove the softened deposits, then run the shower for a minute to flush the nozzles.

  6. 6

    Dry the finish

    Wipe the outside with a mild soap, rinse it and dry it with a soft cloth. Never use abrasive sponges, steel wool, ammonia, bleach or solvents on the finish.

Shower head cleaning card

A fixed chrome shower head in a hard water area
How often
Every 3 months
Soak
Vinegar, a few hours
Hands-on
About 10 min

You need

  • 2 cups of distilled white vinegar
  • A plastic bag and 2 rubber bands
  • Soft brush, mild soap, soft cloth

Steps

  • 21.Warm-water scrub on the nozzles
  • 32.Bag of vinegar tied around the head
  • 43.A few hours
  • 54.Bag off, scrub, run the water 1 minute
  • 65.Mild soap, rinse, dry with a soft cloth

Low pressure that started suddenly, with no buildup, can be a valve problem: call a plumber (Kohler).

Free chore card template

One card per chore. Copy it, or save it to your Evernote account and keep it next to the manual.

Chore: Clean the shower head

How often: [every few months in hard water]

Takes: [minutes]

You need: [supplies]

Steps:
1.
[first step]
2.
[next step]

Model number: [from the label on the appliance]

Last done: [date] · Next due: [date]

Trusted by Millions Worldwide

4.4

2,100+ reviews on G2

4.4

8,200+ reviews on Capterra

4.4

73,000+ reviews on App Store

248M

Registered users

Shower head questions

How long should you soak a shower head in vinegar?

Kohler suggests a few hours in vinegar. Check your own head's care sheet.

How do you clean a shower head without removing it?

Fill a plastic bag with vinegar, pull it up around the head so the nozzles are covered and secure it with tight rubber bands. Leave it to soak, then scrub and run the water.

Why is my shower head losing pressure?

Minerals such as calcium and limescale can build up inside it, according to Kohler. A vinegar soak clears it. A sudden drop with no buildup can point to the shower valve instead.

Can vinegar damage a shower head?

Vinegar is a gentle way to remove mineral buildup. Avoid harsh limescale removers, abrasives, ammonia, bleach and solvents, which can damage the finish.

What should you not use on a shower head?

Avoid abrasive cleaners and sponges, steel wool, ammonia, bleach, organic solvents such as alcohol, and harsh limescale removers. They can damage the finish.

How often should you clean a shower head?

Whenever the spray gets uneven or weak. In hard water areas that can be every few months.

How to keep your shower head clean with Evernote

Keep one note per chore in a Home notebook, and let tasks bring each chore back when it is due.

  1. 1

    Keep the steps with the manual.

    Attach the manual's PDF to the chore note and ask the AI Assistant how to clean the shower head. It reads the PDF and adds the steps to the note as a checklist.

  2. 2

    Make the chore repeat.

    Ask the AI Assistant for a task that repeats every 3 months. It comes with a reminder on the day it is due.

  3. 3

    See every chore in one place.

    Open the Tasks view to see what is due in the next 7 days and later. Assign a task to anyone you share the note with.

  • You can also photograph the model number label, so the right manual and parts are one search away.
  • You can also keep receipts and warranty cards in the same note as the manual.
  • You can also share one house note with everyone you live with.

Keep every chore in one place

Keep the steps with the manual, let each chore repeat on its own, and see everything that is due in one list.

Start for free