[ScanSnap Manager Evernote Edition] Window ([Wi-Fi] Tab)

In this window, you can connect the ScanSnap to a computer via wireless LAN.

The [Wi-Fi] tab consists of the following:

Wi-Fi Scanning is Off

Displayed when the Wi-Fi connection information for the ScanSnap is not configured.

[Network Settings] button

Displayed when the computer is not connected to a wireless LAN and the ScanSnap is not connected to the computer with a USB cable.

Click this button to display a window for configuring the network settings for the computer.

[Enable Wi-FI Scanning] button

Displayed when the computer is connected to a wireless LAN and the ScanSnap is connected to the computer with a USB cable.

Click this button to apply the computer network settings to the Wi-Fi connection information for the ScanSnap.

Cannot connect to the ScanSnap

Displayed when the Wi-Fi connection information for the ScanSnap is configured and the ScanSnap is not connected to the computer via wireless LAN.

[Network Settings] button

Displayed in the following cases:

  • The computer is not connected to a wireless LAN.

  • The computer is connected to a wireless LAN and the ScanSnap is connected to the computer with a USB cable.

Click this button to display a window for configuring the network settings for the computer.

[Reconfigure Wi-Fi Scanning] button

Displayed when the following conditions are met:

  • The computer is connected to a wireless LAN.

  • The ScanSnap is not connected to the computer via wireless LAN.

  • The ScanSnap is connected to the computer via a USB cable.

Click this button to apply the computer network settings to the Wi-Fi connection information for the ScanSnap.

[Disable Wi-Fi Scanning] button

Displayed when the ScanSnap is connected via a USB cable.

Click this button to display a message that asks if you want to override the Wi-Fi connection information for the ScanSnap. Confirm the message to override it.

Wi-Fi Scanning is On

Displayed when the Wi-Fi connection information for the ScanSnap is configured and the ScanSnap is connected to the computer via wireless LAN.

[Disable Wi-Fi Scanning] button

Displayed when the Wi-Fi connection information for the ScanSnap is configured and the ScanSnap is connected to the computer via wireless LAN.

Click this button to display a message that asks if you want to disconnect the connected ScanSnap from the computer via wireless LAN. Confirm the message to disconnect it.