4.4
2,100+ reviews on G2
To change a car battery, disconnect the negative (black) cable first and the positive (red) cable second, lift the old battery out, set the new one in the tray and connect the cables in the reverse order. Four things to know:

Buy the group size and cold cranking amps your owner's manual lists.
Then positive. Connect positive first, then negative.
Lift the old battery straight out so no acid spills.
Batteries hold lead and acid. Take the old one to a recycling center.
Keep your car records in Evernote. Ask the manual, log every job, and get reminded.
Check your owner's manual or the old battery for the group size (for example Group 24 or 35) and the cold cranking amps. You need safety glasses, gloves, a wrench or socket set, a wire brush and a battery terminal cleaner.
Park on a flat surface, set the parking brake and turn off the engine. Open the hood and find the battery. On some cars it sits under a cover.
Loosen the clamp on the negative (black) cable and take it off first. Then loosen and remove the positive (red) cable.
Undo any hold-down bracket, then lift the battery straight out. Do not tip it: it holds sulfuric acid.
White, blue or green powder on the clamps is corrosion. Scrub it off with a wire brush and a baking soda solution. Fit anticorrosion washers on the cable ends if the new battery did not come with them.
Set the new battery in the tray and secure it so it cannot move. Attach the positive (red) cable first, then the negative (black) one, and tighten both clamps.
Check every connection, then start the car and make sure the lights and radio work. Take the old battery to a recycling center. Note the date, so you know how old the battery is the next time the car is slow to start.
| Item | Example |
|---|---|
| 1Group size and CCA | Group 35, 640 CCA, from the manual |
| 3Order off | Negative (black), then positive (red) |
| 4Old battery | Installed March 2022, lifted out upright |
| 5Terminals | Light corrosion on the positive clamp, cleaned |
| 6Order on | Positive (red), then negative (black) |
| 7Check | Starts first time, lights and radio work |
Example swap on November 8, 2026. The old battery went to the recycling center.
Match these to what your owner's manual lists before you buy, so the new battery fits and suits your car.
| Spec | What it is | Where to find it |
|---|---|---|
| Group size | The standard size the battery is built to, such as Group 24 or Group 35. | Owner's manual, or the label on the old battery. |
| Cold cranking amps (CCA) | A rating of how well the battery starts the engine in cold weather. | Owner's manual. |
| Reserve capacity (RC) | A rating of how long the battery can supply power on its own. | Owner's manual or the battery label. |
| Maintenance-free or not | Sealed batteries need no care. Others need distilled water added from time to time. | Owner's manual. |
Source: AAA Club Alliance, "How to Easily Select and Change Your Car's Battery".
Copy it, or save it to your Evernote account and add a line after every job.
Car: [year, make, model] · Plate: [number] · Tire pressure: [psi from the door sticker]
Oil: [grade from the owner's manual] · Change every [miles] or [months]
Engine air filter: last changed [date] at [miles] · next at [miles]
Cabin air filter: last changed [date] at [miles] · next at [miles]
Battery: installed [month, year] · Wipers: replaced [month, year]
Log: [date] · [miles] · [what was done] · [shop or DIY] · [cost]
Next check: [date] · [what to check]
4.4
2,100+ reviews on G2
4.4
8,200+ reviews on Capterra
4.4
73,000+ reviews on App Store
248M
Registered users
The negative (black) one, then the positive (red) one. When you connect the new battery, do the reverse: positive first, then negative.
Typically 3 to 5 years, depending on how you use the car and the climate. Slow starts, flickering lights or a car that will not start are signs it is getting weak.
The group size, cold cranking amps and reserve capacity listed in your owner's manual. The old battery's label shows the group size too.
Corrosion. White, blue or green powder around a terminal, post or cable is a sign to clean the connections. Scrub it off with a wire brush and a baking soda solution.
Take it to a recycling center. Car batteries contain lead and sulfuric acid, which harm the environment if they are thrown away.
It helps. A voltage test with a multimeter shows whether the battery is just discharged or worn out, and whether the alternator is charging it.
Keep the owner's manual, receipts and a service log in a Car notebook. The AI Assistant finds what the manual says about battery replacement and keeps the log current.
Save the owner's manual PDF in the notebook. Ask the AI Assistant "What battery group size does my car take?" It reads the PDF and tells you the answer and the page.
Take a photo of the receipt into a note. Ask the Assistant to add it to your service log, and it fills in the date, mileage, work and cost.
Ask for a repeating task, like testing the battery every year. It comes back on schedule with a reminder.
Keep the owner's manual, your receipts and a service log in one notebook, and let the AI Assistant remind you of the next check.
Start for free